Antony Group Srl
Via Arturo Toscanini 77/79
41122 Modena, Italy
P.iva: 01051150363
Tel: +39 059 271360
E-mail : info@antonybiagini.it
INFO AND HOURS
8.30 – 12.30
14.00 – 18.00
SHOP MILANO MARITTIMA
viale Gramsci 24,
48015 Milano Marittima, Italy
Telefono: +39 328 1934790
SHOWROOM MILANO
Via Santa Maria alla Porta 9,
20123, Milano, Italy
Tel: +39 389 9140565
For any request or question please fill the form below.
1. If you have a belt that you frequently use, measure the distance between the hole you use most and the end of the buckle; this measurement corresponds to your waist size.
2. Warning: do not rely on the numbers marked on the belt’s lining, as they may not accurately represent the size.
3. Measure your waistline directly at the point where you intend to wear the belt. If your measurement falls between two sizes, we recommend choosing the larger size.
In many instances, Biagini belts can be easily shortened, therefore, if you’re uncertain about the size, it’s advisable to purchase the next size up and later adjust it to your preferred size.
The optimal belt size is determined using the third (middle) hole.
All Biagini belts on our website are designed based on the measurement from the central hole to the buckle. The corresponding size is indicated by the numbers on the lining.
1. If you have a belt that you frequently use, measure the distance between the hole you use most and the end of the buckle; this measurement corresponds to your waist size.
2. Warning: do not rely on the numbers marked on the belt’s lining, as they may not accurately represent the size.
3. Measure your waistline directly at the point where you intend to wear the belt. If your measurement falls between two sizes, we recommend choosing the larger size.
In many instances, Biagini belts can be easily shortened, therefore, if you’re uncertain about the size, it’s advisable to purchase the next size up and later adjust it to your preferred size.
The optimal belt size is determined using the third (middle) hole.
All Biagini belts on our website are designed based on the measurement from the central hole to the buckle. The corresponding size is indicated by the numbers on the lining.
